Owandy I-Max Touch - Defects Due to the Device

USER'S MANUAL
General instructions for use
I-Max Touch (110-120V) (Rev. 0)
106
6.11.3 Defects due to the device
1. Should the image show non irradiated areas or be completely white,
this can mean that there is a defect in the alignment between X-ray
beams and sensor (PAN or CEPH) or a partial or total missing of
irradiation; in any case, call the Technical Service.
2. In the event the soft tissue of the patient is not highlighted while
performing a cephalometry, in a latero-lateral, let the technician
verify the adjustment of the Soft Tissue Filter.