Owandy I-Max Touch - Page 88

USER'S MANUAL
General instructions for use
(Rev. 0) I-Max Touch (110-120V)
83
You can pass from Normal Resolution (indicated by the letter "n") to
High Resolution (indicated by the letter "h"), by pressing key
"Examination Mode Selection" (10) and viceversa.
Pressing twice the key (10) the unit will return to
PANORAMIC STD position; the display shows:
C O NF I M P AN?
> 0 < = S , T = N
Pess the "Patient Entrance" (6) key to confirm or the "Test" (5)
Key to cancel the setting.
NOTE:
With the same image format, the scanning time is lower in Normal
Resolution; this allows you to give the patient a smaller dose, yet still
obtaining an image of sufficient quality for the orthodontic diagnostics,
albeit with a spatial resolution lower compared with that obtained from
High Resolution images.
NOTE:
The system is positioned in the following configuration:
• ADULT with the display of the corresponding graphic in the button
• MEDIUM SIZE with the display of the corresponding graphic in the
button.
The key "Type of Biting Selection" (9) is disabled.
3. By means of the keys "Arrow right" (12) and "Arrow left" (11)
select the dimensions of the image and the type of projection (see the
table at the beginning of the Chapter).
*
*