6
1. SAFETY INFORMATION
To use the products safely, follow the instructions provided here. Keep the product documentation
nearby and offer it to other users. Contact Oxxius or your local representative if you have any question,
or if some parts of this manual are not understood.
QUALIFICATION AND TRAINING OF PERSONNEL
Personnel who operate the combiner must be adequately trained and qualified for the work concerned
and should have read and understood this manual. The user must understand the potential dangers
presented by a laser equipment and observe the recommendations of this manual. These users also have
a sound knowledge of at least one of the languages in which the interfaces and the product
documentation are available.
SIGNAL WORDS IN THE DOCUMENTATION
The following sidebars point out a risk that the operator needs to be aware of. The signal word indicates
the severity of the safety hazard and how likely it will occur if the safety precautions are not followed.
1-1 Safety instructions
Use the product only for its intended use and within its performance limits. Intended use and limits are
described in the product documentation such as the data sheet and the manuals. If you are unsure about
the appropriate use, contact Oxxius customer service.
In these safety instructions, the term “product” covers the L4Cc or L6Cc combiner and its accessories
(patch cables, etc.).
WARNING: Describes a potentially hazardous situation, that could result in serious
injury if not avoided.
CAUTION: Describes a potentially hazardous situation, that could result in minor or
moderate injury if not avoided.
NOTICE: Describes a potential risk of damage, that could result in damage to the
supported product or to other property.
To Next Page
Loading...