12
INTERLOCKED PANEL FOR MAINTENANCE
The combiner has a panel accessible for maintenance. This panel is connected to an interlock circuit that
will shut off the emission as the panel is open, in order to avoid the exposure to laser radiations of
hazardous levels. This panel is indicated by the label on figure 1-7.
1-2 Labels on the product
Labels on the casing inform about:
• Personal and laser safety,
• Product and environment safety,
• Identification of the product
Do not remove nor tear these labels.
LABELS REGARDING PRODUCT AND ENVIRONMENT SAFETY
This symbol means that reading this instruction manual is mandatory prior to using the
equipment or to performing any level of maintenance.
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life.
For more information, refer to chapter 5-6, “Disposal”.
This pictogram stands for “direct current”.
LABELS REGARDING LASER SAFETY
The labels present on the laser head inform about the laser class, the laser aperture location and the
emission characteristics. Refer to the following figures to locate these labels on the combiner.
To Next Page
Loading...