OXXIUS L4Cc - Instrument Tour; Laser Head

20
2. Retain the original packing material. Use it when transporting or shipping the product later.
3. Using the delivery notes, and the following table 3-1, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact your local representative.
Table 3-3: Packing list and accessories of the laser combiner, plug-and-play version
Name
Quantity
Laser head (laser sources included)
1
Remote control
1
Country-specific power cord
1
USB cable (“A to B” type)
1
Laser emission key for the remote control
2
Mating connector (short-circuit) for the safety interlock
1
Mating connector for the I/O port (for shutter arming)
1
Angle brackets and M6 x 10mm fixing screws
4
USB Flash drive
1
Printed Manufacturing Test Report
1
This user manual
1
3-2 Instrument tour
LASER HEAD
Here are the accessible elements on the laser head. For annotated drawings, refer to the section
“Technical documents”, annex B.
Figure 3-4: Front view of the laser head of the L4Cc combiner (free space output)
Maintenance
cover
Cover fixation
screws (x2)
Output channel 1
(laser aperture)