OXXIUS L4Cc - Page 86

86
Assigns a gateway IP address (for a static IP
assignment)
EGA
“EGA 192.168.1.1” Assigns the gateway IP address to
192.168.1.1
Retrieves the assigned gateway IP address
?EGA
“192.168.1.1”
Assigns the subnet mask of the combiner
(for a static IP assignment)
EMA
“EMA 255.255.255.0” Assigns the subnet mask to
255.255.255.0
Retrieves the assigned subnet mask
?EMA
“255.255.255.0”
Retrieves the MAC address of the combiner
?EMAC
“00:11:22:33:44:55”
Sets the TCP socket number. The combiner
needs to be restarted after this variable
has been modified.
ESO
“ESO 22300” Assigns the communication socket port to
22300.
Retrieves the communication socket port
?ESO
“22300” is the default value.
Sets the Ethernet communication speed
ESP
“ESP 0” : Auto-negotiation
“ESP 1” : 10Base-T, full duplex
“ESP 2” : 100Base-TX, full duplex
Retrieves the Ethernet speed
?ESP
“0”: Auto-negotiation
Retrieves the serial number of the
combiner unit
HID?
“L4CC-XXXXX” on a L4Cc combiner,
“L6CC-XXXXX” on a L6Cc combiner
Retrieves the model of the source on slot n
(where n is a number from 1 to 6)
INF? n
“LCX-561-100” for a LCX LaserBoxx emitting 100mW at
561nm
Retrieves the firmware version of the
combiner
?SV
“1.0.17”
Configuration and status:
Purpose
Query
Syntax and examples
Sets the regulation loop to “automatic
constant current”
ACC
ACC 1 (ACC,<space>,1): set the ACC mode on all LBX units
ACC 0 (ACC,<space>,0): set the APC mode on all LBX units