Palm Tungsten C User Manual

Chapter 2 Exploring Your Handheld
10
Locating back panel components
Universal connector
Connects your handheld to the cradle, which in turn
connects to the back of your computer and through the
AC adapter to the wall current. This allows you to recharge
your handheld as well as update the information between
your handheld and computer, using HotSync technology.
The universal connector also connects peripheral hardware
devices to your handheld.
Reset button
Under normal use, you should not have to use the reset
button. See “Resetting your handheld” in Appendix A for
information about when and how to use the reset button.
Expansion card slot
Accepts SD, MultiMediaCard, and SDIO expansion cards,
enabling you to add more memory, applications, or other
functionality. You can also back up data to an expansion
card.
NOTE
Expansion cards are purchased separately.
Headset jack
Connects a hands-free headset to your handheld, enabling
you to record and playback voice memos. You can also listen
to audio-enabled applications with the privacy of using a
headset.
Speaker
For improved system sounds and the playing of audio files,
such as voice recording (.wav) or multimedia.
Side channel
The left side channel holds the front cover, which slides in
and out.
Universal
connector
Expansion
card slot
Side channel
for cover
Reset
button
Headset jack
Speaker

Palm Tungsten C Specifications

General

Brand	Palm
Model	Tungsten C
Category	Handhelds
Language	English