Recharging problems
403
Recharging problems
Problem Solution
When I place my handheld in
the cradle, the indicator light
does not go on.
Try each of these in turn:
■ Confirm that your handheld is firmly connected to the
cradle/cable.
■ Confirm that your recharger cable is properly connected to
the cradle/cable. On some cradles/cables the recharger
cable connects to the back of the USB or serial port
connector that plugs into your computer, and on other
cradles/cables the recharger cable connects to the back of
the cradle/cable.
■ Confirm that your recharger is plugged into an AC outlet
that has power.
■ With your handheld seated in the cradle/cable. Press the
power button and press Home . Confirm that there is a
lightening bolt on the battery icon at the top of the screen.
■ Charge your handheld for at least two full hours.
To Next Page
Loading...
Need help?
General
