Setting Communication Preferences
355
Wi-Fi preferences
The Wi-Fi Preferences screen allows you to configure your 802.11b network
settings and view network status.
IMPORTANT
Your Tungsten C handheld operates in the Industry Scientific and
Medical band (ISM). Not all countries support all channels in the ISM band. Because
the regulations for wireless communication vary between countries, the Tungsten C
handheld is only certified for use in the country where it was originally sold. For more
information on which channels your handheld supports, see Appendix C.
Turning the 802.11b radio on and off
The Wi-Fi preferences screen allows you to turn the 802.11b radio on and off. It also
indicates what network you are connected to and whether you are out of range.
NOTE
If the Signal field indicates that there are no networks within range, the
802.11b radio continues to check for a network until you turn the radio off. If you move
to an area that is within range and the radio is on, Wi-Fi automatically connects.
To turn the 802.11b radio on or off:
■ Tap the Wi-Fi pick list and select On or Off.
Finding Wi-Fi connection information
Your IT administrator may need your MAC (Media Access Control) address. The
Wi-Fi Info screen shows you the address and other Wi-Fi information.
Tap pick list and
select On
To Next Page
Loading...
Need help?
General
