Setting Communication Preferences
345
To add connection details:
1. Tap the service field.
2. Tap Details.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your service provider or dial-in server when you switch out of
a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following options:
2. Press Function + Enter
,
or tap OK.
Selecting Next Service
Next Service allows you to automatically try another connection method when the
primary method fails. If the current connection fails, then a connection to the
selected service is attempted. If you do not want to try another service connection,
select None.
To select the Next Service:
■ Tap the Next Service pick list and select a service.
1 minute
Waits one minute for you to open another application before it
drops the connection.
2 minutes
Waits two minutes.
3 minutes
Waits three minutes.
Never
Maintains your PPP or SLIP connection until you turn off your
handheld (or until it times out).
CAUTION
By enabling this option, you may incur significant
charges if the connection to your service provider is left open.
To Next Page
Loading...
Need help?
General
