Section 300-Installation Appendix B. CPC-AII/B 8.0 Feature Update
DBS-2.3/9.2-300 DBS Manual - Revised April 2000 Page B-15
Figure B-16.Desk Stand Removal.
4. Rotate the desk stand 180°. In this position it doubles as a wall mount bracket.
5. Insert the wall mount bracket into the mounting guides as shown in Figure D-17.
6. Slide the wall mount bracket onto the telephone.
Figure B-17.Inserting the wall mount bracket (rotated desk stand)
7. While viewing the front of the telephone, find the handset guide located just below the
hookswitch (see Figure D-8).
8. Slide the handset guide out, rotate 180° so that the holding clip is exposed, and reinsert.
Step 2
Step 3
Step 5
Step 6
To Next Page
Loading...
