Panasonic FP E Series - Chapter 1 Functions and Restrictions of the Unit; Features and Functions of the Unit; Unit Types; Restrictions on Unit Combinations

Table of Contents
Before You Start
Programming Tool Restrictions
When Changing Ladder Program from 12k Type to 32k Type
Compatibility with FP0
1. Functions and Restrictions of the Unit 1-1
1.1 Features and Functions of the Unit 1-2
1.2 Unit Types
1-6
1.2.1 FPΣ Control Unit
1-6
1.2.2 FPΣ Expansion Unit
1-7
1.2.3 FP0 Expansion Unit
1-8
1.2.4 Communication Cassette
1-8
1.3 Restrictions on Unit Combinations
1-9
1.3.1 Restrictions on FP0 Expansion Unit
1-9
1.4 Programming Tools
1-11
1.4.1 Tools Needed for Programming
1-11
1.4.2 Software Environment and Suitable Cable
1-11
2. Specifications and Functions of the Unit 2-1
2.1 Parts and Functions 2-2
2.2 Input and Output Specifications
2-6
2.2.1 Input Specifications
2-6
2.2.2 Output Specifications
2-8
2.3 Terminal Layout Diagram
2-11
2.3.1 Control Unit (for C32)
2-11
2.3.2 Control Unit (for C28)
2-12
2.3.3 Control Unit (for C24)
2-12
2.4 Analog Potentiometer
2-13
2.4.1 Overview of Analog Potentiometer
2-13
2.5 Thermister Input (Only for TM type)
2-14
2.5.1 Overview of Thermister Input
2-14
2.5.2 Loading of Thermister Temperature Data
2-16
2.6 Calendar Timer
2-17
2.6.1 Area for Clock/Calendar Function
2-17
2.6.2 Setting of Clock/Calendar Function
2-17
2.6.3 Example Showing the Clock/Calendar being Used
2-18
2.6.4 30-second Compensation Sample Program
2-19