Panasonic FP E Series - Type of Expansion Unit

3-2
3.1 Type of Expansion Unit
The FPΣ expansion unit (including intelligent units) and the FP0 expansion unit (expansion I/O unit and
intelligent unit) can be used with FPΣ.
The FP0 expansion units are connected on the right side of the control unit, just as they were with the
FP0. The FPΣ expansion units are connected to the left side of the control unit.
Note:
• The FPΣ expansion unit cannot be connected to FPG-C32T, FPG-C32TTM, FPG-C32TH or FPG-
C32THTM. Only the FP0 expansion unit can be connected.