Panasonic FP E Series User Manual

12-14
WR902
Relay No. Name Description
R9020 RUN mode flag
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
R9021 Not used
R9022 Not used
R9023 Not used
R9024 Not used
R9025 Not used
R9026 Message flag Turns on while the F149 (MSG) instruction is executed.
R9027 Not used
R9028 Not used
R9029 Forcing flag
Turns on during forced on/off operation for input/output
relay timer/counter contacts.
R902A Interrupt enable flag
Turns on while the external interrupt trigger is enabled by
the ICTL instruction.
R902B Interrupt error flag Turns on when an interrupt error occurs.
R902C Not used
R902D Not used
R902E Not used
R902F Not used

Panasonic FP E Series Specifications

General

Brand	Panasonic
Model	FP E Series
Category	Controller
Language	English