Panasonic FP E Series User Manual

12-19
WR908
Relay No. Name Description
R9080
Unit
No.1
Turns on when Unit No. 1 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9081
Unit
No.2
Turns on when Unit No. 2 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9082
Unit
No.3
Turns on when Unit No. 3 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9083
Unit
No.4
Turns on when Unit No. 4 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9084
Unit
No.5
Turns on when Unit No. 5 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9085
Unit
No.6
Turns on when Unit No. 6 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9086
Unit
No.7
Turns on when Unit No. 7 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9087
Unit
No.8
Turns on when Unit No. 8 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R9088
Unit
No.9
Turns on when Unit No. 9 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9089
Unit
No.10
Turns on when Unit No. 10 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908A
Unit
No.11
Turns on when Unit No. 11 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908B
Unit
No.12
Turns on when Unit No. 12 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908C
Unit
No.13
Turns on when Unit No. 13 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908D
Unit
No.14
Turns on when Unit No. 14 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908E
Unit
No.15
Turns on when Unit No. 15 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.
R908F
MEWNET-W0
PC(PLC) link
1
transmission
assurance
relay
(32k only)
Unit
No.16
Turns on when Unit No. 16 is communicating properly in
PC(PLC) link 1 mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link 1 mode.

Panasonic FP E Series Specifications

General

Brand	Panasonic
Model	FP E Series
Category	Controller
Language	English