v
9.2 Handling BCD Data
9-4
9.2.1 BCD Data
9-4
9.2.2 Handling BCD Data in the PLC
9-4
9.3 Handling Index Registers
9-5
9.3.1 Index Registers
9-5
9.3.2 Memory Areas Which can be Modified with Index Registers
9-5
9.3.3 Example of Using an Index Register
9-6
9.4 Operation Errors
9-7
9.4.1 Outline of Operation Errors
9-7
9.4.2 Operation Mode When an Operation Error Occurs
9-7
9.4.3 Dealing with Operation Errors
9-7
9.4.4 Points to Check in Program
9-8
9.5 Instruction of Leading Edge Detection Method
9-9
9.5.1 Instructions of Leading Edge Detection Method
9-9
9.5.2 Operation and Precautions When RUN Starts
9-10
9.5.3 Precautions When Using a Control Instruction
9-11
9.6 Precautions for Programming
9-13
9.7 Rewrite Function During RUN
9-14
9.7.1 Operation of Rewrite During RUN
9-14
9.7.2 Cases Where Rewriting During Run is not Possible
9-15
9.7.3 Procedures and Operation of Rewrite During RUN
9-17
9.8 Processing During Forced Input and Output
9-19
9.8.1 Processing when forced input/output is initiated during RUN
9-19
10. Specifications 10-1
10.1 Table of Specifications 10-2
10.1.1 General Specifications
10-2
Performance Specifications
10-5
10.2 I/O No. Allocation
10-12
10.3 Relays, Memory Areas and Constants
10-14
11. Dimensions 11-1
11.1 Dimensions 11-2
11.1.1 Control Unit (Transistor Output Type)
11-2
11.1.2 Control Unit (Relay Output Type)
11-3
11.1.3 Expansion Unit
11-4
11.2 Connection Diagram with Motor Driver
11-5
11.2.1 Matsushita Electric Industrial Co., Ltd. MINAS A-series, AIII-series
11-5
11.2.2 Matsushita Electric Industrial Co., Ltd. MINAS Sseries, E-series
11-5
11.2.3 Power Supply Specification
11-6
To Next Page
Loading...
Need help?
General
