Safety Precautions
● In order to prevent injuries and accidents, always adhere to the following.
● Always read this manual thoroughly before performing installation, operation, maintenance, and inspection,
and use the device correctly.
● Ensure you are familiar with all device knowledge, safety information, and other precautions before use.
● In this manual, safety precaution levels are classified into "warnings" and "cautions".
Cases where dangerous situations are expected to arise whereby the user could die or
suffer serious injury if product is handled incorrectly
● Implement safety measures externally from this product so that the entire system can operate safely even if
a failure occurs due to a fault in this product or some external factor.
● Do not use in an atmosphere containing flammable gases.
Doing so could cause explosions.
● Do not dispose of this product by placing it in fire.
This could cause splitting of batteries, electronic components, etc.
Cases where dangerous situations are expected to arise whereby the user could suffer
injury or physical damage could occur if product is handled incorrectly
● In order to prevent the product from generating abnormal heat or emitting smoke, use the product with some
margin to the guaranteed characteristics and performance values.
● Do not disassemble or modify the product.
Doing so could cause abnormal heat generation or smoke.
● Do not touch electrical terminals while the power is on.
There is a risk of electrical shock.
● Construct external emergency stop and interlock circuits.
● Securely connect wires and connectors.
Poor connections can cause abnormal heat generation or smoke.
● Do not allow foreign materials such as liquids, combustibles, or metals, to enter inside the product.
Doing so could cause abnormal heat generation or smoke.
● Do not perform work (connection, disconnection, etc.) while the power is on.
There is a risk of electrical shock.
● If methods other than those specified by our company are used when operating this product, the protection
functions of the unit may be lost.
● This product was developed and manufactured for use in industrial environments.
Copyright / Trademarks
● The copyright of this manual is owned by Panasonic Industrial Devices SUNX Co., Ltd
● Unauthorized reproduction of this manual is strictly prohibited.
● Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
● Other company and product names are trademarks or registered trademarks of their respective companies.
Handling Precautions
■
In this manual, the following symbols are used to indicate safety information that
must be observed.
Indicates an action that is prohibited or a matter that requires caution.
Indicates an action that must be taken.
Indicates supplemental information.
WUME-FP7COM-07 v
To Next Page
Loading...
Need help?
General
