9. Attached Function
9.1 Input Value Correction -------------------------------------------------------------- 85
9.2 Set Value Lock ------------------------------------------------------------------------ 87
9.3 Control Output OFF Function ------------------------------------------------------ 88
9.4 Switching Auto/Manual Control (Auto/Manual Control Function) --------- 89
9.5 Using as a Converter ---------------------------------------------------------------- 90
9.6 Clearing Data -------------------------------------------------------------------------- 92
9.7 2DOF PID control --------------------------------------------------------------------- 92
10. Action Explanation
10.1 OUT1 Action ------------------------------------------------------------------------- 93
10.2 OUT1 ON/OFF Control Action -------------------------------------------------- 93
10.3 Alarm Action ------------------------------------------------------------------------- 94
10.4 OUT2 (Heating/Cooling Control) Action -------------------------------------- 96
10.5 OUT2 (Heating/Cooling Control) Action (When Setting Dead Band) - 97
10.6 OUT2 (Heating/Cooling Control) Action (When Setting Overlap Band) - 98
11. Specifications
11.1 Standard Specifications ----------------------------------------------------------- 99
11.2 Specified Specifications ---------------------------------------------------------- 107
12. Troubleshooting
12.1 Indication ---------------------------------------------------------------------------- 109
12.2 Key Operation ---------------------------------------------------------------------- 112
12.3 Control -------------------------------------------------------------------------------- 112
13. Character Table
13.1 Error Code -------------------------------------------------------------------------- 113
13.2 Run Mode --------------------------------------------------------------------------- 114
13.3 Monitor Mode ----------------------------------------------------------------------- 114
13.4 Initial Setting Mode ---------------------------------------------------------------- 115
13.5 Main Setting Mode ---------------------------------------------------------------- 119
13.6 Sub Setting Mode ----------------------------------------------------------------- 121
13.7 Engineering Mode 1 -------------------------------------------------------------- 123
13.8 Engineering Mode 2 -------------------------------------------------------------- 130
14. Key Operation Flowchart ------------------------------------------------------------ 131
To Next Page
Loading...
