3.5 [1-1] Slot—OPB3 Card Property
The properties of the built-in 2-channel SVM (Simplified Voice Message) and OGM (Outgoing Message)
features can be specified. To change the status of the built-in ESVM card, click Command.
Only the following parameters can be set. Other parameters on this screen are only applicable for the Optional
Base card. See 3.36 [1-1] Slot—OPB3 Card Property for details.
Note
To reach this screen, move the mouse pointer over the IPCMPR card and click SVM Property.
Slot
Indicates the slot type (reference only).
Default
IPCMPR
Value Range
IPCMPR
Maintenance Console Location
3.5 [1-1] Slot—OPB3 Card Property
Programming Manual References
None
Feature Manual References
None
Sub-Slot
Indicates the sub-slot number (reference only).
Default
Current sub-slot number
Value Range
Sub-slot number
Maintenance Console Location
3.5 [1-1] Slot—OPB3 Card Property
Programming Manual References
None
106 PC Programming Manual Document Version 2009-12
3.5 [1-1] Slot—OPB3 Card Property
To Next Page
Loading...
