To view digital CO line information
1. From the Utility menu, select Digital Trunk Error Report.
2. From the Slot No drop-down list, select the target slot.
• To generate a report on a specific card, select the slot number and card name.
• To generate a report on all matching cards simultaneously, select "ALL".
3. From the Display form drop-down list, select the time period to view.
4. Click Execute.
The error report will be displayed.
2.6.14 Utility—IP Extension Statistical Information
Displays accumulated statistical information on IP extensions, V-IPEXT32 cards, V-IPCS4 cards, and the
DSP card.
The displayed items are as follows:
Item
Description
Collection Started Time Date and time the port was last reset.
Port No. Number of the port.
RTP Receive Packet Counter Total number of packets received.
RTP Receive Lost Packet Counter Total number of packets lost.
RTP Receive Abandoned Packet Counter Total number of packets abandoned.
RTP Arrive Packet Interval (MAX.) [ms] Maximum time taken for a packet to
arrive.
RTP Arrive Packet Interval (MIN.) [ms] Minimum time taken for a packet to
arrive.
To view IP extension information
1. From the Utility menu, select IP Extension Statistical Information.
2. From the Card Selection drop-down list, select the slot number for the card. "IPCMPR (VoIP-DSP)" can
be selected for the DSP card when DSP Card Status is enabled. See 3.4 [1-1] Slot—Card Property -
IPCMPR.
3. Click Execute.
The statistical information will be displayed.
4. Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Clear to erase the information and reset the Collection Started Time.
5. Click Cancel to return to the main screen.
2.6.15 Utility—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
54 PC Programming Manual Document Version 2009-12
2.6.15 Utility—CS Information
To Next Page
Loading...
