Panasonic KX-NCP500 - Co Line Access

CLI (Calling Line Identification) Distribution
• 8.1 [6-1] System Speed Dial
– Name
– CO Line Access Number + Telephone Number
– CLI Destination
• 12.2 [10-2] DIL Table & Port Settings—CLI for DIL— CLI Ring for DIL—Day, Lunch, Break, Night
• 12.3 [10-3] DID Table— CLI Ring for DID—Day, Lunch, Break, Night
Feature Manual References
3.1.14 CLI (Calling Line Identification) Distribution
CLIP (Calling Line Identification Presentation)
• 3.31 [1-1] Slot—Port Property - PRI Port
– CO Setting— Subscriber Number
– Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, E911
• 3.34 [1-1] Slot—Port Property - T1 Port— Subscriber Number
• 4.9 [2-6-1] Numbering Plan—Main—Features
– COLR Set / Cancel
– CLIR Set / Cancel
– Switch CLIP of CO Line / Extension
• 4.18 [2-9] System Options—Option 4— Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Party)
• 5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— CLIP on G-DN Button
• 6.1 [4-1-1] Wired Extension—Extension Settings
– Main— Extension Number
– ISDN CLIP— CLIP ID
– ISDN CLIP— CLIP on Extension/CO
– ISDN CLIP— CLIR
– ISDN CLIP— COLR
• 6.5 [4-1-4] Wired Extension—Flexible Button— Type
• 6.10 [4-2-1] Portable Station—Extension Settings
– ISDN CLIP— CLIP ID
– ISDN CLIP— CLIP on Extension/CO
– ISDN CLIP— CLIR
– ISDN CLIP— COLR
• 6.13 [4-2-3] Portable Station—Flexible Button— Type
• 6.17 [4-3] DSS Console— Type
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
CO Line Access
• 3.24 [1-1] Slot—Port Property - Extension Port— Connection
• 3.28 [1-1] Slot—Port Property - LCO Port— Connection
• 3.31 [1-1] Slot—Port Property - PRI Port— Connection
856 PC Programming Manual Document Version 2009-12
14.2 Feature Programming References