2.6.7 Utility—Message File Transfer PBX to PC
Transfers Outgoing Message (OGM) files from the MSG/ESVM card/block mounted on an OPB/IPCMPR card
to the PC.
This option is only available at Installer level.
Note
• When transferring to or from an MSG/ESVM card mounted on an OPB card, the OPB card must be
set to OUS status.
• When transferring to or from the built-in ESVM block on the IPCMPR card, the ESVM block must be
set to OUS status.
To transfer OGMs to the PC
1. From the Utility menu, select Message File Transfer PBX to PC.
2. From the upper drop-down list, select the target MSG/ESVM card/block.
3. From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialog box will be displayed.
4. Enter a file name.
5. Click Save.
6. Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a number
appended to the file name corresponding to that message’s location on the MSG/ESVM card/block.
When complete, the display will return to the main screen.
2.6.8 Utility—Error Log
Collects and displays system error information.
Whenever there is a system failure, the PBX stores the error code generated. The connected PC collects all
of these codes, along with other information, and displays an explanatory error message.
The functions of the buttons on this screen are as follows:
Button
Function
Cancel Closes the Error Log screen without saving.
Capture Saves the currently displayed Error Log information as a text file.
Minor Displays minor errors, which affect only a certain part of system
operation.
Major Displays major errors, which affect operation of the whole system, or
result in system failure.
Clear Erases the stored error log information from both the screen and the
PBX.
Log Information Displays probable causes of the errors and their solutions.
The items displayed on screen are as follows:
50 PC Programming Manual Document Version 2009-12
2.6.8 Utility—Error Log
To Next Page
Loading...
