• 5.3 [3-1-3] Caller ID Modification
Feature Manual References
3.1.3 Caller ID
Call Hold
• 4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
– Recall—Hold Recall
– Recall—Disconnect after Recall
• 4.9 [2-6-1] Numbering Plan—Main—Features
– Call Hold / Call Hold Retrieve
– Call Hold Retrieve : Specified with a Holding Extension Number
– Hold Retrieve : Specified with a Held CO Line Number
• 4.18 [2-9] System Options
– Option 1— PT Operation—Automatic Hold by ICM / CO / ICD Group key
– Option 1— PT Operation—Hold Key Mode
– Option 5— SLT—SLT Hold Mode
Feature Manual References
3.1.4 Call Hold
Call Log, Incoming
• 5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD— Supervisor
Extension Number
• 6.1 [4-1-1] Wired Extension—Extension Settings
– Option 5— Incoming Call Display
– Option 6— Display Lock / SVM Lock
– Option 7— Incoming Call Log Memory
• 6.5 [4-1-4] Wired Extension—Flexible Button— Type
• 6.10 [4-2-1] Portable Station—Extension Settings
– Option 5— Incoming Call Display
– Option 7— Incoming Call Log Memory
• 6.17 [4-3] DSS Console— Type
Feature Manual References
3.1.5 Call Log, Incoming
Call Monitor
• 4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature— Call Monitor
• 4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR— Call Monitor
• 6.1 [4-1-1] Wired Extension—Extension Settings
– Option 2— Data Mode
– Option 3— Executive Override Deny
• 6.10 [4-2-1] Portable Station—Extension Settings—Option 3— Executive Override Deny
Document Version 2009-12 PC Programming Manual 853
14.2 Feature Programming References
To Next Page
Loading...
