Default Value Data
Name on SD Memory Card Corresponding Card
DBINI IPCMPR
DBIDHLC DHLC4
DBISLC SLC8
DBIDLC DLC8/DLC16
DBILCOT LCOT4
DBIT1 T1
DBIOPB3 OPB3
DBIEIO EIO
DBIPRI23 PRI23
DBISLCLC SLC16
DBIVIPGW V-IPGW16
DBIVSPGW V-SIPGW16
DBIVIPEX V-IPEXT32
DBIVSPEX V-SIPEXT32
To transfer files to the SD memory card
1. From the Utility menu, select File Transfer PC to PBX (SD Card).
The dialog box will be displayed.
2. Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
3. Click OK.
2.6.3 Utility—File Transfer PBX (SD Card) to PC
Copies system data files from the SD memory card installed in the PBX to the connected PC.
This option is only available at Installer level.
The files that can be downloaded from the SD memory card are as follows:
File Name
File Type
DBSYS System Data
$SYSERR Error Data
$SYSERR1–$SYSERR9
LIC00–LIC99 Activation Key
Downloading the DBSYS system data file allows you to make a backup of the configuration of the PBX.
Document Version 2009-12 PC Programming Manual 47
2.6.3 Utility—File Transfer PBX (SD Card) to PC
To Next Page
Loading...
