Panasonic KX-NCP500 - 1-1] Slot-Port Property - Virtual SIP Extension Port-Connection Command

3.19 [1-1] Slot—Port Property - Virtual SIP Extension
Port—Connection Command
Commands for the virtual SIP extension ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.19 [1-1] Slot—Port Property - Virtual SIP Extension Port—Connection Command
Programming Manual References
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Feature Manual References
16.1.2 SIP (Session Initiation Protocol) Extension
OUS
Takes the port out of service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.19 [1-1] Slot—Port Property - Virtual SIP Extension Port—Connection Command
Programming Manual References
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Feature Manual References
16.1.2 SIP (Session Initiation Protocol) Extension
184 PC Programming Manual Document Version 2009-12
3.19 [1-1] Slot—Port Property - Virtual SIP Extension Port—Connection Command