3.37 [1-1] Slot—OPB3 Card Property—Card
Command
Commands for the service cards installed on the OPB card can be programmed.
INS
Puts the card in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.37 [1-1] Slot—OPB3 Card Property—Card Command
Programming Manual References
None
Feature Manual References
None
OUS
Takes the card out of service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.37 [1-1] Slot—OPB3 Card Property—Card Command
Programming Manual References
None
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 301
3.37 [1-1] Slot—OPB3 Card Property—Card Command
To Next Page
Loading...
