Panasonic KX-NCP500 - 4 Appendix

3.30 [1-1] Slot—Card Property - PRI type
The properties of the PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Default
10 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN line as
a TIE line.
Default
20 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
13.1.15 PRIVATE NETWORK FEATURES
Document Version 2009-12 PC Programming Manual 237
3.30 [1-1] Slot—Card Property - PRI type