Panasonic KX-NCP500 - Trunk Group Access

Default
9
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
5.2 [3-1-2] Trunk Group—Local Access Priority
Feature Manual References
3.1.16 CO Line Access
Trunk Group Access
Specifies the feature number used to make a CO line call using an idle CO line from a certain trunk group.
Default
8
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.16 CO Line Access
TIE Line Access
Specifies the feature number used to make a TIE line call.
Default
7
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Document Version 2009-12 PC Programming Manual 355
4.9 [2-6-1] Numbering Plan—Main