Panasonic KX-NCP500 - 3.3 Customising System (System Programming)

3.28 [1-1] Slot—Port Property - LCO Port
Various settings can be programmed for each analog CO line port.
To change the status of ports, click Command.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
230 PC Programming Manual Document Version 2009-12
3.28 [1-1] Slot—Port Property - LCO Port