EasyManua.ls Logo

Panasonic KX-NCP500 - Utility-CS Status Monitor

Panasonic KX-NCP500
892 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The displayed items are as follows:
Item Description
PS No. PS location number.
Only registered PSs will be displayed.
Extension Number Extension number of the PS.
Location—Slot Slot number of the CS that the PS is registered with.
Location—Port Port number of the CS that the PS is registered with.
To view PS information
1. From the Utility menu, select PS Information.
2. Click Refresh.
2.6.17 Utility—CS Status Monitor
This utility monitors the status of CSs within Air Synchronization Groups. CSs receive data from other CSs that
they are currently synchronized with, within the Air Synchronization Group. Current Sync CS information is
displayed for IP-CSs that are in INS status.
This option is only available at Installer level.
The displayed items for the Current Sync CS of each CS are as follows:
Item
Description
CS Type Type of CS that each CS is currently synchronized with.
Slot Type Slot type of the CS that each CS is currently synchronized with.
Slot Slot number of the CS that each CS is currently synchronized with.
Port Port number of the CS that each CS is currently synchronized with.
CS / Repeater Indicates whether the CS that each CS is currently synchronized with is a
CS or Repeater.
CS Name Name of the CS that each CS is currently synchronized with.
CS ID 12-digit ID number of the CS that each CS is currently synchronized with.
Monitored Value Monitored value (dBm) of the CS that each CS is currently synchronized
with.
Monitored Level Monitored level (signal strength level) of the CS that each CS is currently
synchronized with.
To monitor the status of CSs
1. From the Utility menu, select CS Status Monitor.
2. From the Air Sync Group No drop-down list, select an Air Synchronization Group.
3. From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4. Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
56 PC Programming Manual Document Version 2009-12
2.6.17 Utility—CS Status Monitor

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals