2.6.12 Utility—V-IPGW16 Protocol Trace
This utility collects trace data of protocol activity from V-IPGW16 card.
This option is only available at Installer level, and requires that the target V-IPGW16 card be set to INS status.
To save trace data to the SD Memory Card
1. From the Utility menu, select V-IPGW16 Protocol Trace.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
SD Memory Card (file name: "PRTH323").
To transfer trace data to the PC
1. From the Utility menu, select File Transfer PBX (SD Card) to PC.
The list of trace data files will be displayed.
2. Select the desired trace data file.
3. Click Transfer.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
7. Click OK.
2.6.13 Utility—Digital Trunk Error Report
Displays accumulated information on various types of errors occurring on digital CO lines.
This option is only available at Installer level.
The value displayed for each error item is the number of times that each error occurred during the time period
selected. Average values for these items vary depending upon many factors, such as the equipment being
used, and the distance from the telephone company.
The displayed items are as follows:
Item
Description
Time Time of error
Slot Relevant slot and card type
Counter of Digital Trunk
Error Logs logged in
"Minor Error" Log
Out of SYNC (#300) Digital CO line out of sync (Loss of Signal)
RAI (#301) Digital CO line RAI signal reception
AIS (#302) Digital CO line Alarm Indication Signal
reception
Frame Failure (#300) Digital CO line frame failure (Loss of Frame)
Counter of minor
communication error
CRC Cyclic Redundancy Check error
SF Severely errored frame (or Severe Framing
Error)
FE Frame synchronization bit-error
LV Line Code Violation
SL Controlled slip
Document Version 2009-12 PC Programming Manual 53
2.6.13 Utility—Digital Trunk Error Report
To Next Page
Loading...
