Incoming Call Queue Monitor
Specifies the feature number, available only for extensions assigned as a supervisor, used to monitor the status
of an incoming call distribution group with the extension display.
Default
*739
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—
Supervisor Extension
Number
Feature Manual References
9.1.7 ICD Group Features—Supervisory
Hot Line (Pickup Dial) Program Set / Cancel
Specifies the feature number used to set/cancel the Hot Line feature, or program the number to be automatically
dialed.
Default
*740
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Hot Line (Pickup Dial) Start
Feature Manual References
8.1.6 Hot Line
Absent Message Set / Cancel
Specifies the feature number used to set or cancel the display of an Absent Message.
Default
*750
376 PC Programming Manual Document Version 2009-12
4.9 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
