4.12 [2-7-1] Class of Service—COS Settings—Programming & Manager— Executive Busy Override Deny
Feature Manual References
5.1.3 Executive Busy Override
Not Ready (Manual Wrap-up) Mode On / Off
Specifies the feature number used to enter or leave Not Ready mode.
Default
*735
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
9.1.3 ICD Group Features—Log-in/Log-out
Log-in / Log-out
Specifies the feature number used to join or leave an incoming call distribution group.
Default
*736
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
9.1.3 ICD Group Features—Log-in/Log-out
Document Version 2009-12 PC Programming Manual 375
4.9 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
