5.2 [3-1-2] Trunk Group—Local Access Priority
Trunk groups can be assigned a priority for Idle Line Access. When making a CO line call by Idle Line Access,
the PBX will search trunk groups for an idle CO line according to the priority assigned here.
Trunk Group No. & Name
Specifies the trunk group assigned to the corresponding priority level.
Select the blank option to not assign a trunk group to the priority.
Default
Priority 1–64 = Trunk Group No. 1–64
Value Range
Trunk Group No. 1–64
Maintenance Console Location
5.2 [3-1-2] Trunk Group—Local Access Priority
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.16 CO Line Access
Document Version 2009-12 PC Programming Manual 459
5.2 [3-1-2] Trunk Group—Local Access Priority
To Next Page
Loading...
