8.6 [6-6] Tenant
A maximum of 8 tenants can share the PBX. Each tenant is composed of specified extension user groups.
The PBX offers each tenant its own Time Table and system resources.
To assign extensions as operators easily, click Extension No. Setting (see 2.1.6 Extension Number
Setting).
Music On Hold
Specifies the audio source to be used for Music on Hold.
Default
Same as System Setting
Value Range
Same as System Setting, BGM, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, Tone
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
4.4 [2-2] Operator & BGM
Feature Manual References
11.1.4 Music on Hold
17.1.3 Tenant Service
Operator (Extension Number)
Specifies the extension number or the floating extension number of an incoming call distribution group to be
designated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as the
tenant operator.
Default
Not stored.
Value Range
100–699
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
4.4 [2-2] Operator & BGM
Document Version 2009-12 PC Programming Manual 741
8.6 [6-6] Tenant
To Next Page
Loading...
