This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.7 [1-1] Slot—Port Property - Virtual IP Gateway Port
Programming Manual References
None
Feature Manual References
None
Call Distribution Port Group
Specifies a call distribution port group to which incoming CO line calls are directed through the virtual VoIP
gateway port.
Default
1
Value Range
1–16
Maintenance Console Location
3.7 [1-1] Slot—Port Property - Virtual IP Gateway Port
Programming Manual References
None
Feature Manual References
3.1.2 Call Distribution Port Group
112 PC Programming Manual Document Version 2009-12
3.7 [1-1] Slot—Port Property - Virtual IP Gateway Port
To Next Page
Loading...
