5.18 [3-7-1] VM(DPT) Group—System Settings
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the PBX.
The DPT ports that are connected to the VPS are called a VM (DPT) Group.
2 VM (DPT) Groups can be programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
5.18 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port
Feature Manual References
9.1.6 ICD Group Features—Queuing
19.1.3 Voice Mail (VM) Group
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a call is redirected to
the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the VPS answers the
call with the appropriate mailbox.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
5.18 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port
6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—
Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
506 PC Programming Manual Document Version 2009-12
5.18 [3-7-1] VM(DPT) Group—System Settings
To Next Page
Loading...
