3.35 [1-1] Slot—Port Property - T1 Port—Connection
Command
Commands for the T1 channels can be programmed.
INS
Puts the channel in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - T1 Port—Connection Command
Programming Manual References
3.34 [1-1] Slot—Port Property - T1 Port
Feature Manual References
None
OUS
Takes the channel out of service. This enables a temporary non-use of the port, for example, for the purpose
of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - T1 Port—Connection Command
Programming Manual References
3.34 [1-1] Slot—Port Property - T1 Port
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 295
3.35 [1-1] Slot—Port Property - T1 Port—Connection Command
To Next Page
Loading...
