Panasonic KX-NCP500 - 1-1] Slot-Card Property - T1 Type

3.33 [1-1] Slot—Card Property - T1 type
The properties of the T1 card can be specified.
Line Coding
Selects the line coding type of T1 PCM (Pulse Code Modulation) used.
Default
B8ZS
Value Range
B8ZS, AMI
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Frame Sequence
Selects the type of frame sequence used for communications.
Default
ESF
Value Range
D4, ESF
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
ESF Frame Sequence
Selects the values for C-bit and D-bit. To enable this setting, Frame Sequence on this screen should be
set to ESF.
274 PC Programming Manual Document Version 2009-12
3.33 [1-1] Slot—Card Property - T1 type