Panasonic KX-NCP500 - 8-7] Authorization Code for TRG

10.8 [8-7] Authorization Code for TRG
An Authorization code can be specified for each trunk group. The Authorization codes entered here can be
added to user-dialed numbers by adding "G" to the Modify Command specified on the Carrier tab of screen
10.6 [8-5] Carrier.
8 trunk groups are displayed on the screen at a time. To display other groups, click the applicable tab.
Authorization Code for Trunk Group—TRG 01–TRG 64
Specifies the Authorization code of each carrier for each trunk group.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.8 [8-7] Authorization Code for TRG
Programming Manual References
10.6 [8-5] Carrier—Carrier— Modify Command
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Document Version 2009-12 PC Programming Manual 765
10.8 [8-7] Authorization Code for TRG