Call Hold Retrieve : Specified with a Holding Extension Number
Specifies the feature number used to retrieve a held call from a different extension by specifying a holding
extension number.
Default
*51
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
3.1.4 Call Hold
Call Park / Call Park Retrieve
Specifies the feature number used to hold a call in a parking zone or retrieve a call held in a parking zone.
Default
*52
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
3.1.7 Call Park
Hold Retrieve : Specified with a Held CO Line Number
Specifies the feature number used to retrieve a held CO line call from a different extension by specifying the
held CO line number.
Default
*53
364 PC Programming Manual Document Version 2009-12
4.9 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
