Overlap—Dial End Code
Specifies the delimiter code to be used to signal the end of a dialed number.
Default
#
Value Range
0–9, #, *
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
Incoming Call
Voice Activity Detection for G.711
Enables the use of the Voice Activity Detection feature for the G.711 codec. This feature conserves bandwidth
by detecting silent periods during a call and suppressing the packets of silence from being sent to the network.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Manual References
None
Voice Codec Priority 1st
Specifies the highest priority codec type. For fax communications, it is necessary to specify G.711A or G.
711µ for this parameter.
Document Version 2009-12 PC Programming Manual 127
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
To Next Page
Loading...
