Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Manual References
None
Flash Timing - Range
Specifies the maximum length that a signal sent from an SLT can be for the PBX to recognize it as a hookswitch
flash signal.
Default
904 ms
Value Range
8 ´ n (n=3–191) ms
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
Feature Manual References
None
DTMF-R STD Detection Time
Specifies the minimum length that a DTMF tone must be for the PBX to recognize it as a DTMF tone.
Default
30 ms
Value Range
2 ´ n (n=1–31) ms
Maintenance Console Location
3.23 [1-1] Slot—Card Property - Extension Type
Programming Manual References
None
206 PC Programming Manual Document Version 2009-12
3.23 [1-1] Slot—Card Property - Extension Type
To Next Page
Loading...
