Feature Manual References
None
DPT Type—Air Sync Group Name
Indicates the name of the Air Synchronization Group of the CS (reference only).
The group name set on the 5.26 [3-10] Air Synchronization Group screen is displayed here.
Default
Not stored.
Value Range
Not applicable.
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
5.26 [3-10] Air Synchronization Group
13.6 [11-5] Air Synchronization
Feature Manual References
None
Headset OFF/ON
Turns on or off the use of a headset with a DPT. This setting is only available when Port Type on this screen
is set to DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT).
Default
Headset OFF
Value Range
Headset OFF, Headset ON
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Manual References
8.1.3 Headset Operation
Document Version 2009-12 PC Programming Manual 215
3.24 [1-1] Slot—Port Property - Extension Port
To Next Page
Loading...
