CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible tones can
be heard as the dialed number is sent out, which informs the extension user that the number has been dialed.
Default
Yes
Value Range
No, Yes
Maintenance Console Location
3.27 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
None
Bell Detection—Bell Start Detection Timer
Specifies the minimum length of a bell signal that can be recognized by the PBX as the bell signal sent from
the telephone company, before the PBX detects an arriving call.
Default
144 ms
Value Range
24 ´ n (n=1–50) ms
Maintenance Console Location
3.27 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
None
Bell Detection—Bell Off Detection Timer
Specifies the duration of the bell off detection timer. If the PBX receives no bell signal from the telephone
company for the length of time specified here, the PBX treats the call as lost.
Default
6.0 s
Document Version 2009-12 PC Programming Manual 221
3.27 [1-1] Slot—Card Property - LCO type
To Next Page
Loading...
