Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Reverse Detection
Selects the type of CO line call for which the reverse signal from the telephone company is detected.
Default
Disable
Value Range
Disable: For no CO line call
Outgoing: For outgoing CO line calls only
Both Call: For both outgoing and incoming CO line calls
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
3.28 [1-1] Slot—Port Property - LCO Port
Programming Manual References
3.27 [1-1] Slot—Card Property - LCO type
Document Version 2009-12 PC Programming Manual 233
3.28 [1-1] Slot—Port Property - LCO Port
To Next Page
Loading...
