Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC (disconnection) message
to ISDN.
Default
300 ´ 100 ms
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message from ISDN.
Default
40 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
240 PC Programming Manual Document Version 2009-12
3.30 [1-1] Slot—Card Property - PRI type
To Next Page
Loading...
