Panasonic KX-NCP500 - 4.2 Feature Number Table

Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T316
Specifies the maximum time that the PBX waits for a reply after sending the Restart message.
Default
0 ´ 100 ms
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
Programming Manual References
None
Feature Manual References
None
ISDN CO / QSIG Master / QSIG Slave—T318
Specifies the maximum time that the PBX waits for a reply after sending the Resume message.
Default
0 ´ 100 ms
Value Range
0–600 ´ 100 ms
Maintenance Console Location
3.30 [1-1] Slot—Card Property - PRI type
242 PC Programming Manual Document Version 2009-12
3.30 [1-1] Slot—Card Property - PRI type