Programming Manual References
None
Feature Manual References
None
Answer Detection Timer
Specifies the length of time required by the PBX to recognize the answer signal. This allows the telephone
company to have enough time to accept the dialed digits correctly.
Default
32 ms
Value Range
32 ´ n (n=1–255) ms
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Wink Signal Width
Specifies the length of a wink signal.
Default
224 ms
Value Range
32 ´ n (n=4–9) ms
Maintenance Console Location
3.33 [1-1] Slot—Card Property - T1 type
Programming Manual References
None
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 277
3.33 [1-1] Slot—Card Property - T1 type
To Next Page
Loading...
