Panasonic KX-NCP500 - Page 288

Value Range
DTMF, Pulse
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
4.1.3 Dial Mode Selection
Channel Type
Selects the channel type.
Default
Undefined
Value Range
Undefined: Not assigned
GCOT: Ground Start Central Office
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
TIE: TIE Line
OPX: Off Premise Extension
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
17.1.1 T1 Line Service
Trunk Property
Selects the CO line property of the TIE channel.
Default
Public
Value Range
Public: Use the DIL/DID method to distribute incoming CO line calls.
288 PC Programming Manual Document Version 2009-12
3.34 [1-1] Slot—Port Property - T1 Port